DirectLOGIC DL105 Manuel - Sayfa 8

I/O Sistemleri DirectLOGIC DL105 için çevrimiçi göz atın veya pdf Manuel indirin. DirectLOGIC DL105 13 sayfaları.

1- -8

Getting Started

DL105 PLC User Manual, 3rd Edition

Step 3: Connect the Power Wiring

Connect the power input wiring for the

version DL105 you have. Observe all

precautions stated earlier in this manual.

For more details on wiring, see Chapter 2

on Installation, Wiring, and Specifications.

When the wiring is complete, close the

connector covers. Do not apply power at

this time.

110/220 VAC Power Input

94 -- 240 VAC

Step 4: Connect the Programming Device

Most programmers will use DirectSOFT programming software, installed on a

personal computer. Or, you may need the portability of the Handheld Programmer.

Both devices will connect the COM1 port of the DL105 via the appropriate cable.

12/24 VDC Power Input

10 -- 30 VDC

125 VDC Power Input

100 -- 240 VDC

Use cable part no.

D2--DSCBL

(cable comes with HPP)

For replacement

cable, use part no.

DV--1000CBL