Clarke DEVIL 350B 110V Kullanım ve Bakım Talimatları - Sayfa 13

Isıtıcı Clarke DEVIL 350B 110V için çevrimiçi göz atın veya pdf Kullanım ve Bakım Talimatları indirin. Clarke DEVIL 350B 110V 17 sayfaları.

FAULT FINDING

SYMPTOM

Heater does not

operate, although

plugged in and

switched on.

Heater does not

respond to remote

controller

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

PROBLEM

Plug is loose/bad

connection.

Fuse blown.

No power at socket

outlet.

Tilt safety switch is

disabling the heater.

Batteries defective.

Controller is out of

range or not pointing

at the display panel.

SOLUTION

Remove the plug & check

the connection of the plug

and socket.

Replace if necessary and

investigate the cause. If the

fuse blows repeatedly,

consult your Clarke dealer.

Insert the plug into a

suitable socket.

Ensure heater is upright. If

the switch does not re-set,

consult your Clarke dealer.

Replace batteries.

Move closer or try different

angles of pointing the

controller at the heater.