Clarke XR60 Kullanım ve Bakım Talimatları - Sayfa 8

Isıtıcı Clarke XR60 için çevrimiçi göz atın veya pdf Kullanım ve Bakım Talimatları indirin. Clarke XR60 17 sayfaları. Paraffin/diesel heater

HEATER START UP

1. Make sure power switch is in the

OFF position.

2. Turn thermostat to lowest setting.

3. Plug the heater into the mains

power supply.

4. Turn the thermostat to highest

setting.

5. Start heater by setting the power

switch to the ON position.

• The switch illuminates in the ON position.

6. Adjust thermostat to desired setting.

NOTE: Heater will cycle on/off to maintain an even temperature.

1. Set the power switch to the OFF

position.

2. For extended shutdown, unplug

the heater from the mains supply.

BEFORE STORAGE

• Clean the heater as described

in the MAINTENANCE section.

• The manufacturer

recommends completely filling

the tank with fuel for extended storage to minimize condensation

inside the tank.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]