Clarke 6462001 Kullanıcı Talimatları - Sayfa 5

Araçlar Clarke 6462001 için çevrimiçi göz atın veya pdf Kullanıcı Talimatları indirin. Clarke 6462001 13 sayfaları. 40-piece rotary tool kit

ASSEMBLY OF COMPONENTS

STAND FOR THE ROTARY TOOL

Screw the telescopic tube into the bracket and tighten.

Clamp the bracket to a workbench or worktop with a

maximum thickness at 2-1/8".

Slacken the top tube by turning the black knob anticlockwise (-).

Draw the tube out to its maximum height and secure it by

turning the knob clockwise (+).

Turn the middle tube anticlockwise (-) and extend as required.

Lock in position by turning the tube clockwise (+).

The Rotary Tool can now be supported by the suspension

bracket of the stand as shown. (the suspension bracket

can be turned 360

ASSEMBLING ACCESSORIES TO THE TOOL

IMPORTANT: Ensure the tool is switched OFF at the

mains supply and at the tool switch.

•

Press down on the drive shaft locking button (2),

and hold down.

•

Undo the chuck (1) using the spanner provided.

•

Insert the mandrel of the tool to be used in to the

chuck FULLY and tighten the chuck.

ASSEMBLING DISCS & GRINDING STONES TO THE MANDREL

•

Mount the selected disc on to the mandrel as shown,

ensuring the two washers are in place.

DO NOT overtighten the screw.