Clarke 6500411 Kullanım Talimatları Kılavuzu - Sayfa 5

Araçlar Clarke 6500411 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Clarke 6500411 13 sayfaları. 12” disc sander

ADDITIONAL SAFETY INSTRUCTIONS FOR DISC

SANDERS

• ALWAYS place the sander on a solid wood workbench which will not

move under load.

• ALWAYS wear safety goggles as protection against flying grit and/or

sawdust. In many cases, a full face shield is even better protection. A

dust mask is also recommended to keep saw dust out of your lungs.

• ALWAYS clear the work table of all objects except the workpiece

(tools, scraps, rulers etc.) before switching on the sander.

• ALWAYS keep your fingers well away from the disc.

• ALWAYS switch off the sander, and make sure the disc has come to a

complete stop before clearing sawdust from the table.

• ALWAYS make sure there are no nails or foreign objects in the part of

the workpiece to be sanded.

• ALWAYS set up the machine and make all adjustments with the

power OFF, and disconnected from the supply.

• ALWAYS use the correct type and size of sanding disc for each

operation.

• ALWAYS maintain a gap of 1.5 - 2mm MAX. between the sanding

Disc and the table.

• ALWAYS take great care if sanding non-ferrous metals. Dust from

some materials can be extremely dangerous.....toxic or explosive.

• NEVER operate the machine with the guards or table removed. They

must all be in place and securely fastened when performing any

operation

• NEVER sand any material that does not have a flat surface on which

to bear.

• NEVER force the work into the disc....Hold it FIRMLY and press it gently

into the disc, on the DOWNWARD direction side.

• NOTE: The disc spins in an ANTICLOCKWISE direction. The workpiece

should ALWAYS be sanded on the LEFT HAND HALF of the disc.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]