Clarke CHT738 Kullanım ve Bakım Talimatları Kılavuzu - Sayfa 4

Araçlar Clarke CHT738 için çevrimiçi göz atın veya pdf Kullanım ve Bakım Talimatları Kılavuzu indirin. Clarke CHT738 6 sayfaları. Hammer tacker

USING YOUR HAMMER TACKER

SELECTING THE RIGHT STAPLE:

To maximize performance, your hammer tacker has been designed to work

with Clarke staples available from you local Clarke dealer.

SELECTING THE RIGHT STAPLE LENGTH:

As a general guideline, when stapling into wood, allow for staple leg

penetration of approximately 4.5 - 6.0 mm.

LOADING INSTRUCTIONS

1. Push the feeder button inwards

slightly then press downwards to

unlock the feeder strip.

2. Once lock is unhooked, pull the

feeder strip out from the staple

chamber.

• Do not twist the staple feeder

button.

3. Load a strip of staples into the

loading tunnel as shown.

4. Slide in the feeder strip.

5. Push the feeder button upwards

to its locked position.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]