Clarke METALWORKER CMSSCS Kullanıcı Talimatları - Sayfa 2

Araçlar Clarke METALWORKER CMSSCS için çevrimiçi göz atın veya pdf Kullanıcı Talimatları indirin. Clarke METALWORKER CMSSCS 8 sayfaları. Metal shrinker/stretcher set

Sayfayı Yazdır

INTRODUCTION

Thank you for purchasing this CLARKE product.

The CMSSCS Metal Stretcher/Shrinker Set is a handy pair of tools for sheet

metal fabricators who need custom, curve shaped metal straps, trim and

flanges for auto body repair and general sheet metalwork.

Before attempting to use this product, please read this manual thoroughly and

follow the instructions carefully. In doing so you will ensure the safety of yourself

and that of others around you and you can look forward to your purchase

giving you long and satisfactory service.

INVENTORY

A) Shrinker Body c/w Dies

B) Stretcher Body c/w Dies

C) Levers

SPECIFICATIONS

Max thickness-aluminium

.......................16Ga/1.5mm

Max thickness-mild steel

........................18Ga/1.2mm

Max thickness-Stainless Steel

.......................20Ga/1.0mm

Mounting bolt hole size- 3/8"(x2)

SAFETY PRECAUTIONS

WARNING: THE USER MUST FOLLOW ALL INSTRUCTIONS WITHIN THIS

INSTRUCTION BOOKLET

To protect against injury observe the following precautions when using this

product. Clarke International is not responsible for misuse of the equipment.

• ALWAYS secure the tool in a bench vice before use.

• ALWAYS keep the work area free of obstructions.

• NEVER try to bend material other than hot-rolled mild steel.

• NEVER modify the tool or use a handle extension arm other than the

one provided.