CTM LYNG MICROSAFE mKomfy Hybrid 400R Kullanıcı Talimatları - Sayfa 2
Aksesuarlar CTM LYNG MICROSAFE mKomfy Hybrid 400R için çevrimiçi göz atın veya pdf Kullanıcı Talimatları indirin. CTM LYNG MICROSAFE mKomfy Hybrid 400R 2 sayfaları.
Ayrıca CTM LYNG MICROSAFE mKomfy Hybrid 400R için: Kurulum Talimatları Kılavuzu (16 sayfalar)
Sayfayı Yazdır
SAFETY FUNCTIONS
The mKomfy Cooker Guard is a safety product
that has been developed to prevent fires
when cooking.
The mKomfy Hybrid is a "Class B" cooker
guard and does not react to flames or smoke.
It relies on a clear view from the sensor to
the hob in order to detect heat.
The cooker guard will therefore be unable
to prevent a fire if the hob is covered
with flammable materials (e.g. cardboard,
newspaper), or if such materials catch
fire near the hob.
In order to avoid false alarms, the cooker
guard spends a short amount of time
analysing the information from the hob.
Hobs powerful enough to start a fire in under
120 seconds work so quickly that the cooker
guard may find it hard to react before a fire is
ignited, depending on the cookware and the
substances in it on the hob.
The product assumes normal care in the use of
the cooker and associated cookware.
In normal use the cooker should be kept under
frequent observation, even if safety equipment
such as mKomfy is installed.
The product must be installed and maintained
correctly as described, and may only be fitted by an
authorised electrician.
2
EVERYDAY USE
Alarm
visual/audible
The cover should be cleaned
regularly with a damp cloth
and soapy water.
Press the control button to:
• Reset alarm
• Extend cooking time
• Reset cut-out
Things to think about when cooking
Sliding a pan across to another ring will expose
a very hot surface, and the Cooker Guard may
register this as overheating, causing the alarm
to go off.
Use pans that cover the whole ring to reduce
the chance of unwanted temperature alarms.
3
BATTERIES
Batteries
(does not apply if an external power supply
is used)
We recommend changing the batteries
every year or if there is a low battery
warning.
1.
Remove the sensor from the bracket.
2.
Change the batteries (3 x "AA").
3.
Put the sensor back in the bracket.
4.
Give the control button a quick press. There will be
a beep if the batteries have been changed correctly.
Taking the sensor off/putting the sensor on the sensor bracket
(back cover)
Skins for the front panel
On our website, you can find
dimensioned sketches for making your
own skins, which you can cut to size and
position under the sensor's front panel.
See www.ctmlyng.no/hybrid
Optional extras
Optional extras can be connected
to your cooker guard to increase
safety or cover additional needs –
see separate user instructions.
Power Break
mTouch
HUB
External
reset button
4
®
External
master switch