Claro GLIDER DC Kurulum Kılavuzu - Sayfa 10

Fan Claro GLIDER DC için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Claro GLIDER DC 17 sayfaları.

6. Place the hanging ball on top of the downrod

7. Secure it with the ball pin and two set screws.

Earth

8. Tighten one fan blade with 3 screws from under the motor.

9. Repeat with the remaining 2 fan blades.

10. Hang the fan into hanging bracket. Align ball groove on hanging ball with ridge on hanging bracket.

Ensure hanging ball sitting into hanging bracket correctly. If fan doesn't sit properly, hold the

downrod and twist it until fan has been secured into hanging bracket.

Ball Groove

Ridge

Ball Pin

Set Screw