3Com NBX 100 Hızlı Referans Kılavuzu

Ağ Geçidi 3Com NBX 100 için çevrimiçi göz atın veya pdf Hızlı Referans Kılavuzu indirin. 3Com NBX 100 2 sayfaları. Business telephone
Ayrıca 3Com NBX 100 için: Yayın Notu (8 sayfalar), Yayın Notu (11 sayfalar), Yazılım Yükseltme Talimatları (4 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar)

Sayfayı Yazdır

Put a Call on Hold

While you are on a call, press Hold. The indicator light

beside a line on hold blinks slowly. To return to the call,

press the line button where the call is being held.

Transfer a Call

1. While you are on a call, press Transfer.

2. When you hear the dial tone, dial the number to which

you want to transfer the call.

3. As soon as you hear ringing, press Transfer (for a blind

transfer), or wait until the recipient answers, announce

the call, press Transfer, and then hang up.

Make a Conference Call

1. Place or receive a call. Two parties are now on the call.

2. While you are on the first call, press Conference.

3. Listen for the dial tone. Dial the third party, wait for

that party to answer, and press Conference again to

complete the call.

4. Optionally, repeat steps 2 and 3 to add a fourth party.

• At least one party must be internal. The conference

ends when the last internal party hangs up.

• To place your part of a conference call on hold,

press Hold. The other parties can talk to each other,

but they cannot hear you. (Music on Hold is not

played.)

• To transfer a conference call, see Transfer a Call.

• To drop the last person whom you added to the

conference (for instance, if the called party's

telephone is answered by someone else), press

Feature + 431.

Adjust the Volume

• Handset — Lift the handset, listen to the dial

tone, and repeatedly press the louder or softer

volume button.

• Speaker — Press Speaker, listen to the dial tone or

your caller's voice, and repeatedly press the louder

or softer volume button.

• Ringer — While the telephone is ringing,

repeatedly press the louder or softer volume button.

Mute a Call

While you are on a call, press Mute (2102) or

The indicator light is lit and you can hear the caller, but the

caller cannot hear you. To return to the call, press the mute

button again.

Set Internal Calls to Activate the Speaker

Press Handsfree (2102) or

lit. Whenever an internal call arrives, a tone sounds and the

speakerphone is activated. To turn this feature off, press

Handsfree or

again.

NBX

Business Telephone

Quick Reference Guide

(3102).

(3102). The indicator light is

Create Customized Labels for Your Telephone

Telephone Labels.

Set or Change Your Speed Dials, Call Forwarding, Call

Pickup, and Phone Lock

See the NBX Business Telephone Guide or NBX NetSet

Help.

Forward Incoming Calls to Your Voice Mail

(Calls ring once and go to your default call coverage.)

Press the FWD MAIL button (2102) or

indicator light comes on; all incoming calls ring once and

are forwarded to your default call coverage point. To turn it

off, press FWD MAIL or

Switch Your Telephone to Do Not Disturb

(Calls go immediately to your default call coverage.)

Pick up the handset and press Feature + 446. All calls go

directly to your default call coverage point without ringing

on your telephone. The display indicates that the feature is

active. To turn the feature off, pick up the handset and

press Feature + 446 again.

Park a Call

1. While you are on a call, press the Call Park Access

button, or if Call Park is not assigned to an Access

button, press Feature + 444.

2. Dial one of the extensions reserved for Call Park.

3-digit dial plan — 601–609

4-digit dial plan — 6000–6099

• Ask your administrator if your system has a different

range of Call Park extensions.

• The call is parked until someone retrieves it, the

caller hangs up, or the Call Park timer expires.

• If the extension you chose is busy or the Call Park

timer expires, the call returns to your telephone.

Press Call Park or Feature + 444 again and try

another extension.

Retrieve a Parked Call

Dial the Call Park extension where the call was parked.

Dial from the Telephone Display Panel

1. Pick up the handset.

2. Press the up or down scroll button to view the menu:

Call Logs (Missed Calls, Answered Calls, Dialed Calls),

Directory, Personal Speed Dials, or System Speed Dials.

3. Press one of the three buttons below the display:

Slct — To select the list that you want to see.

Back — To return to the previous menu.

Exit — To leave the display panel menus.

4. Repeat steps 3 and 4 until you see the name or

number that you want. Then press Slct to dial the

number.

utility and go to Resources >

™

(3102). The

again.

qkrefbus-EN 1-2006