Acorn OMEGA Kurulum, Çalıştırma ve Bakım Talimatları - Sayfa 4

Kontrol Ünitesi Acorn OMEGA için çevrimiçi göz atın veya pdf Kurulum, Çalıştırma ve Bakım Talimatları indirin. Acorn OMEGA 6 sayfaları. Thermostatic mixing valve

Sayfayı Yazdır

INSTALLATION: ST7017-CU & -CPVC

1. Locate mixing valve 1 in a suitable place

accessible for servicing and adjusting. Valve

should be as close as possible to point of use.

2. Thoroughly flush supplies.

3. Slide Brass Nut 2, onto supply and outlet

Tubing.

4. Insert Tubing Adapter 3 onto the end of the

Tubing 4,

a. For -CU sweat Adapter 3 to Tube

b. For -CPVC Glue Adapter 3 to end of tubing

using appropriate PVC Pipe Cement.

5. Insert Gasket 5 between Valve body 1 and

Adapter 3 then tighten Hex Nut 2.

6. Slowly turn on supplies, check for leaks and

tighten Hex Nut 2 if needed.

Detail - A

Acorn Controls

Division of Acorn Engineering Company

Manual #7802-127-001

ST7017 Installation & Operation Manual

TEMPERATURE ADJUSTMENT:

1. Using 5/8" 6 Wrench loosen Locknut 7.

Detail A

2. Turn on fixture so temperature can stabilize.

3. Using an 1/8" Allen Wrench 8, turn adjustment

stem 9 counter-clockwise for hotter or

clockwise for colder outlet temperature.

Detail B

4. Tighten locknut 7 to prevent any unauthorized

or accidental temperature adjustment.

5. Turn on fixture(s) and re-check temperature.

, A member of Morris Group International

Detail - B

™

Page 4 of 6

Date: 07/20/2020