Clarus Technologies WCS-25 Operatör El Kitabı - Sayfa 14
Temizlik Ekipmanları Clarus Technologies WCS-25 için çevrimiçi göz atın veya pdf Operatör El Kitabı indirin. Clarus Technologies WCS-25 16 sayfaları. Cleaning stations
Ayrıca Clarus Technologies WCS-25 için: Operatör El Kitabı (14 sayfalar)
Sayfayı Yazdır
3. Check air hose for kinks or damage.
4. Confirm air pump is plugged into the electrical box.
Soak Tank Pump doesn't work
D.
1. Check for defective power cord; plug in pump with extension cord.
2. Inspect pump base screen and impeller for damage or obstruction.
E.
Wand/Brush leaking or drips
1. Tighten fittings.
2. Remove fittings and remove Teflon tape, then re-tape and re-assemble.
3. Tighten hose clamps.
4. Check for damage and wear, replace as necessary.
F.
Canister Lids difficult to remove and install
1. Lubricate lid o-ring and threads with petroleum jelly (note: always apply
petroleum jelly to o-ring with every filter change). Do not overtighten lids.
G.
Sight Glass dirty or clogged
1. Blow clean with air gun or fluid nozzle (opening is inside tank just above pan
opposite sight glass).
2. Replace with new clear hose (Tygon 3/8" ID).
H.
Main Pump not running
1. Check power cord, is it plugged in to electric box on lower shelf?
2. Plug pump into extension cord to verify power.
I.
Pump running but not pumping fluid
1. Remove fluid from tank, remove intake and discharge hose from pump. Use
compressed air to clear hoses.
2. Remove front cap on pump and check for debris or wear. Replace if necessary.
J.
Main Pump leaking
1. Inspect for damage.
2. Remove front head assembly and inspect for proper assembly, blow clean with
air gun and reassemble.
K.
Sludge Pump leaking
1. Inspect for cracks, damage or wear
L.
Plumbing leaking
1. Tighten hose clamps.
2. Check all hose connections and hoses for wear or damage and replace if
necessary.
3. Remove plumbing fitting and re-tape with Teflon tape. Re-install and tighten.
M.
No Power Main Pump, Light, Soak Tank Pump do not work
1. Confirm power to wall outlet.
2. Check fuse (10Amp) in electrical box.
14