Aftershokz Aeropex Kullanıcı Kılavuzu - Sayfa 9

Kulaklık Aftershokz Aeropex için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Aftershokz Aeropex 11 sayfaları.
Ayrıca Aftershokz Aeropex için: Kullanıcı Kılavuzu (9 sayfalar)

Sayfayı Yazdır

Multipoint Pairing

Multipoint Pairing allows Aeropex to be connected to two devices,

allowing users to seamlessly transition between the two.

1. Start with your headphones powered off.

2. Press and hold volume+ the LED indicator flashes red and blue.

3. Press and hold the Multifunction Button and Power/Volume+ Button for 3 seconds.

Audrey says "multipoint enabled."

4. Open your first device's Bluetooth

Audrey says "connected".

5. Turn your headphones off.

6. Re-enter pairing mode by pressing and holding the Power/Volume+ Button

the LED indicator flashes red and blue.

7. Open your second device's Bluetooth

Audrey says "connected."

8. Turn your headphones off.

9. Turn your headphones on. Your headphones are now connected to both devices.

10.To turn off the Multipoint Pairing function: Repeat Step 1 and 2. Then press and hold the

Multifunction Button and Volume- Button for 3 seconds until you hear "multipoint disabled."

Moisture Detection Alarm

These headphones can detect liquid such as water, sweat, and rain. If the headphones are

plugged into the charger while wet, the LED indicator will flash red and blue. The headphones will

also vibrate and emit a beep. If this happens, remove the charging cable from the headphones, dry

them completely and then proceed with charging.

menu and select "Aeropex by AfterShokz."