CLAS OM 4029 Hızlı Başlangıç Kılavuzu - Sayfa 4

Servis Ekipmanları CLAS OM 4029 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. CLAS OM 4029 8 sayfaları. Stretch belt installation and removal tool

Sayfayı Yazdır

OM 4029

COMPONENTS

1. Tightener Ø 50mm

2. Tightener Ø 32mm

3. Elastic belt remover

4. Screw M8x25 Ø 5,9mm

5. Screw M8x40 Ø 5,7mm

6. Screw M8x65 Ø 5,6mm L 32,5

7. Screw M8x65 Ø 5,9mm L 11,5

8. Locking pin + nut M8

Belt disassembling

• Mount the elastic belt remover on the pulley (n°3) in the part indicated by the arrow in the image A.

• Choose and screw on the remover the supplied screws accordingly to the dimensions of the pulley, the screw

must slide into the slot, then lock it with the nut and the pin.

Warning : the screw has to lean on the bottom of the pulley.

• Use the suitable key to turn the pulley, rotate following engine rotation, and keep the tightener in its position (pic . B)

• Then rotate the pulley until the complete belt removal (pic. C)

STRETCH BELT INSTALLATION AND REMOVAL TOOL

USE