CLAS AC 1020 Manuel - Sayfa 16

Araçlar CLAS AC 1020 için çevrimiçi göz atın veya pdf Manuel indirin. CLAS AC 1020 20 sayfaları. Cooling system filling/draining device

AC 1020

COOLING SYSTEM FILLING/DRAINING DEVICE

DRAINING THE NEW FLUID TANK

• For this operation, you will need to reconnect the unit to the shop air system if it is not

already connected.

• Open the air supply valve, then set the "Tnak" valve to "New" and the "Air Flow" valve to

"Pressure" (Fig 16).

• Place the cone over the tank (Fig. 18) before opening the orange hose valve (Fig.17).

Once the used fluid tank is completely empty, close the orange hose valve and turn all

the valves on the front panel to the "OFF" position (Fig. 1 and 2).

Fig. 18

Filling

hose

Open

Fig. 16

Filling hose

Drain

hose

Fig. 17

Closed

External

tank