CLAS OE 6047 Manuel - Sayfa 13

Elektrikli Alet CLAS OE 6047 için çevrimiçi göz atın veya pdf Manuel indirin. CLAS OE 6047 16 sayfaları. Hot air gun 50-650 c

OE 6047

ADJUSTMENT

The air temperature can be adjusted to suit a wide range of applications. The table below suggests settings for

different applications

Adjustment

If you are not sure about the correct setting, start with a low temperature setting and gradually increase the

temperature until you achieve optimum results.

HOT AIR GUN 50-650°C

clas-equipements.com

Application

Drying paint, varnish color shade samples, ller, adhesives,

construction joints and stucco forms

Drying wet timbor prior to lling

Removing stickers

Joining adhesives-Large-surface gluing with contact adhesives,

activation of pressure-sensitive adhesives, acceleration of bonding

processes, releasing of bonding points as well as releasing or

bonding of edge band or veneer.

Waxing and de-waxing

Shrinking PVC wrapping and insulation tubes

Defrosting of icy stairs and steps, door locks, trunk lids, car doors

or water pipes, as well as for defrosting refrigerators and ice

boxes

Welding of thermoplastic polymer, ooring materials of PVC and

linoleum, PVC-coated fabric, tarpaulins and foils

Bending plastic pipes and sheets

Soldering plumbing joints, tin, special silver solder, SMD

elements, cable lugs

Loosening rusted or tightly fastened nuts and bolts

Removing old and even thick coatings of oil paint, lacquer,

varnish and synthetic plaster

Disinfection-With hot air of 600°C, you can quickly rid animal

sties/stables of bacteria .Woodworm infestation can be

controlled (Caution: Danger of re! Do not heat up the wooden

surface excessively).