Lenovo ThinkCentre M91 Dağıtım Kılavuzu - Sayfa 19

Masaüstü Lenovo ThinkCentre M91 için çevrimiçi göz atın veya pdf Dağıtım Kılavuzu indirin. Lenovo ThinkCentre M91 34 sayfaları. (simplified chinese) power manager deployment guide
Ayrıca Lenovo ThinkCentre M91 için: Teknik Özellikler (5 sayfalar), Dağıtım Kılavuzu (44 sayfalar), Dağıtım Kılavuzu (44 sayfalar), (İngilizce) Dağıtım Kılavuzu (46 sayfalar), (İtalyanca) Dağıtım Kılavuzu (44 sayfalar), (Almanca) Uygulama kılavuzu (46 sayfalar), (Japonca) Dağıtım Kılavuzu (44 sayfalar), Dağıtım Kılavuzu (42 sayfalar)

Chapter 3. Typical Usage

@Copyright Lenovo 2011

Through WMI, you can configure BIOS settings in the

following ways:

·List BIOS settings

·Change BIOS settings

· Change the boot order (sometimes referred to as the startup

sequence)

·Load default BIOS settings

For a list of all available BIOS settings that can be changed

through

WMI

Lenovo_BiosSetting class (see "List all BIOS settings on the

local computer" on page 16 and "List all BIOS settings on a

remote computer" on page 18 for sample scripts).

See Table 3 on page 4 for a list of available BIOS settings.

To change a BIOS setting, complete the following steps:

Identify the BIOS setting you want to change using the

Lenovo_BiosSetting class (see "List all BIOS settings on the local

computer" on page 16 and "List all BIOS settings on a remote

computer" on page 18 for sample scripts).

2. Identify the value to which the setting will be changed.

Note: See Table 4 on page 4 for a list of available values for a

particular setting.

Change the BIOS setting to the desired value using the

Lenovo_SetBiosSetting class, then use the Lenovo_SaveBiosSetting

class to save the settings (see "Set a single BIOS setting on the local

computer" on page 16 and "Set a single BIOS setting on a remote

computer" on page 17 for sample scripts).

Note: BIOS settings and values are case sensitive.

After making changes to the BIOS settings, you must reboot the

computer before the changes will take effect.

To change the boot order, complete the following steps:

Determine the current setting for "BootOrder" by using the

specific

computer,

use

the