Lenovo Thinkpad edge 13 Tamamlayıcı Kılavuz - Sayfa 37

LAN set to Enable while your computer is in Sleep or Standby mode, you can

reduce the power consumption and prolong the time in Sleep or Standby

mode, by switching the setting of Wake on LAN for Sleep or Standby mode to

Disable. To switch the setting of Wake on LAN, go to Device Manager and do

as follows:

For Windows 7:

1. Click Start → Control panel.

2. Click Hardware and Sound → Device Manager.

3. In the Device Manager window, expand Network adapters.

4. Right-click your network adapter device, and click Properties.

5. Click the Power Management tab.

6. Clear the Allow this device to wake the computer check box.

7. Click OK.

For Windows XP:

1. Click Start → Control panel.

2. Click Performance and Maintenance → System.

3. Click the Hardware tab, and click Device Manager.

4. In the Device Manager window, expand Network adapters.

5. Right-click your network adapter device, and click Properties.

6. Click the Power Management tab.

7. Clear the Allow this device to bring the computer out of standby check

8. Click OK.

Note: If your computer is a ThinkPad Edge 14" or Edge 15" model, it does

not support Windows XP.

Notice for Safety and Warranty information

The latest Safety and Warranty Guide has been uploaded on the Web site. To

refer to it, go to http://www.lenovo.com/think/support, click

Troubleshooting, and then click User's guides and manuals.

The latest Regulatory Notice has been uploaded on the Web site. To refer to it,

go to http://www.lenovo.com/think/support, click Troubleshooting, and then

click User's guides and manuals.

box.

Appendix C. Notices