Lenovo ThinkServer RD640 İşletim Sistemi Kurulum Kılavuzu - Sayfa 29

Masaüstü Lenovo ThinkServer RD640 için çevrimiçi göz atın veya pdf İşletim Sistemi Kurulum Kılavuzu indirin. Lenovo ThinkServer RD640 44 sayfaları. Clinics, small branch office and smb back office/small office, smb, retail back office, infrastructure and departmental applications/mid-sized-firm data center, infrastructure and departmental applications/database, compute and virtual solutions
Ayrıca Lenovo ThinkServer RD640 için: Hızlı Referans Kılavuzu (14 sayfalar)

Sayfayı Yazdır

Note: If you are prompted to verify the digital signature for the drivers, add –no-sig-check to the

command.

esxcli software vib install -v /vmfs/volumes/datastore/filename.vib –no-sig-check

7. Restart your server.

8. In the vSphere Client inventory, right-click the host and select Exit Maintenance Mode.

Installing a Hyper-V Server 2008 or Hyper-V Server 2008 R2 operating

system

This topic provides instructions on how to install the following operating systems.

• Hyper-V Server 2008

• Hyper-V Server 2008 R2 with Service Pack 1

To install a Hyper-V Server 2008 or Hyper-V Server 2008 R2 operating system, do the following:

1. Insert the operating system installation disc into the optical drive that you have set as the first startup

device. Then, start the server from the optical drive.

2. When the message Press any key to boot from cd or dvd... is displayed, press any key. If the message

Windows Setup [EMS Enabled] is displayed, press Enter. Wait several minutes for the system to load

the files.

3. Select the language as you need and then click Next.

4. When the Enter your language and other preferences... window is displayed, configure the language

and other options as you need and then click Next.

5. Click Install now.

6. Read the license terms and select I accept the license terms. Then, click Next.

7. Select the type of installation as you need. The following steps are based on the scenario that Custom:

(Advanced) is selected in this step.

8. On the Where do you want to install Windows? window, connect the USB storage device that contains

the driver to your server and click Load Driver.

9. Browse to the folder where the driver is stored and click OK.

10. Select Hide drivers that aren't compatible with this computer's hardware, and then select the driver

that you want to install on your server. Click Next.

11. On the Where do you want to install Windows? window, click Drive options (advanced).

12. Select the hard disk drive on which you want to install the operating system, and then click New.

13. Type the amount of space (in MB), and then click Apply.

14. On the Install Windows window, click OK.

15. Ensure that the drive partition is correct, and then click Next. The installation begins.

Note: Your server will restart several times during the installation.

16. Before you log in to the server for the first time, do one of the following depending on the operating

system:

• For the Microsoft Hyper-V Server 2008 operating system:

a. Press Ctrl+Alt+Delete when prompted. Click Other User.

b. Type Administrator in the User name field. Then press Enter.

c. Follow the instructions on the screen to change the password.

• For the Microsoft Hyper-V Server 2008 R2 operating system with Service Pack 1:

Chapter 2

Installing an operating system in Legacy mode