CTS MCT-3002 Series Kullanıcı Kılavuzu

Medya Dönüştürücü CTS MCT-3002 Series için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. CTS MCT-3002 Series 2 sayfaları. 10/100/1000base-t to 1000base-x or 100/1000base-x standalone media converter
Ayrıca CTS MCT-3002 Series için: Kullanıcı Kılavuzu (2 sayfalar), Hızlı Kılavuz (2 sayfalar), Kullanıcı Kılavuzu (2 sayfalar), Manuel (2 sayfalar)

Sayfayı Yazdır

Trademarks

CTS is a registered trademark of Connection Technology

Systems Inc. Contents subject to revision without prior notice.

All other trademarks remain the property of their owners.

This publication may not be reproduced as a whole or in part, in

any way whatsoever unless prior consent has been obtained

from Connection Technology Systems Inc.

FCC Warning

This equipment has been tested and found to comply with the

limits for a Class-A digital device, pursuant to Part 15 of the

FCC Rules. These standards are designed to provide

reasonable protection against harmful interference when these

devices are operated in a commercial environment. These

devices generate, use, and can radiate radio frequency energy

and may cause harmful interference to radio communications

unless installed in accordance with this User's Guide.

Operation of these devices in a residential area is likely to

cause harmful interference which will make the user

responsible for the appropriate remedial action at his / her own

expense.

CE Mark Warning

These are Class A products. In a domestic environment these

products may cause radio interference in which case the user

will need to consider adequate preventative methods.

1. Checklist

The package should contain the following items:

- MCT-3002 Series Converter

- AC-DC Power Adapter

- User's Guide

Please notify your sales representative immediately if any

items are missing or damaged.

All manuals and user guides at all-guides.com

2. Overview

The MCT-3002 series media converter converts traditional

twisted-pair RJ-45 cable into various fiber media including

multi-mode, single-mode, SC connector, bi-directional WDM,

or a SFP slot for pluggable fiber transceiver, extending

transmission distance for the deployment to the household,

apartment or campus.

MCT-3002 series media converter is fully compliant with IEEE

802.3, 802.3u, 802.3ab & 802.3z standards.

Besides, it is equipped with some switching features including

store and forward. Operation status can be locally monitored

through a set of Diagnostic LED located in the front panel.

Major Features:

- Auto-Negotiation in TP port

- MDI/MDI-X Auto-Crossover supported

- Support Link Alarm

- Support Jumbo Frame 9K bytes (under 10,100,1000Mbps)

- Store and Forward Switching Mechanism

- Support Auto & Force mode configuration

3. Installation

- Attach fiber cable from the MCT-3002 to the fiber network.

The fiber connections must be matched – transmit socket to

receive socket.

- Attach a UTP cable from the 10/100/1000BASE-T network

to the RJ-45 port on the MCT-3002.

- Connect the power adapter to the MCT-3002 and check

that the PWR/STA LED lights up. The TP and F/O LEDs will

light up when all the cable connections are satisfactory.

Figure 1. MCT-3002 dual fiber Front Panel

Figure 2. MCT-3002 WDM & SFP Front Panel

Figure 3. MCT-3002 Converter Rear Panel

Figure 4. MCT-3002 Converter Side Panel

4. LED Description

LED

Color

Function

PWR/STA

Green Lit when power is available.

Lit when TP cable connection with

Green

remote device is good.

Blink when TP traffic is present.

Lit when Fiber cable connection at

100M with remote device is good.

Green

Blink when F/O traffic is present.

F/O

(For dual rate model only)

Lit when Fiber cable connection at

Orange

1000M with remote device is good.

Blink when F/O traffic is present.

Lit when TP works in Full-Duplex.

FDX

Green

Not-Lit when TP works in Half-Duplex.

Lit when TP works in 10M.

Green

SPD

Lit when TP works in 100M.

Orange Lit when TP works in 1000M.