Lenovo ThinkStation P7 Manuel - Sayfa 16

Masaüstü Lenovo ThinkStation P7 için çevrimiçi göz atın veya pdf Manuel indirin. Lenovo ThinkStation P7 49 sayfaları. Storage configurator

1. Install the FLEX bay into the FLEX bay frame through the bezel. Push the

bay until the retention tab locks the bay into place in the frame.

2. To install the M.2 SSD into the FLEX Bay M.2 carrier, remove the screws

from each side of the carrier.

3. Lift up on the lid on the end of the carrier slightly (1) and slide the lid out

from under the tabs on the front of the carrier base (2).

4. Peel back and remove the protective film from the heat sink pads on the lid

and base.