Lenovo ThinkSystem SR650 Hızlı Başlangıç Kılavuzu - Sayfa 12

Sunucu Lenovo ThinkSystem SR650 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Lenovo ThinkSystem SR650 14 sayfaları. -48 v dc

Step 2.

Note the orientation and slide a power-supply filler is installed, remove it.

Figure 8. Hot-swap power supply filler removal

Step 3.

Slide the new hot-swap power supply into the bay until it snaps into position.

Figure 9. Hot-swap power supply installation

After installing the hot-swap power supply:

1. Connect one end of the power cord to the new power supply connector; then, connect the other end of

the power cord to a properly grounded electrical outlet.

2. If the server is turned off, turn on the server. Ensure that both power input LED and the power output

LED on the power supply are lit, indicating that the power supply is operating properly. For the location

of the power supply LEDs, refer to Figure 2 "LEDs of power supply" on page 2.

1 1 2 2