Lenovo 10QX Kullanıcı Kılavuzu - Sayfa 8

Monitör Lenovo 10QX için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Lenovo 10QX 49 sayfaları.

Setting up your monitor

This section provides information on how to set up your monitor.

•

Note: Before setting up your monitor, ensure that you have read and understood the "Safety

information" on page iii.

To assemble your monitor, follow the four parts below one by one:

Part 1: Install the full-function monitor stand.

Part 2: Install the Tiny.

Part 3: Install the rear Wi-Fi antenna (optional).

Part 4: Install the Kensington-style cable lock (optional).

Part 1: Install the full-function monitor stand.

Note: The full-function monitor stand includes one monitor stand and one stand base.

Assembling your monitor

Connecting cables

Turning on your monitor and computer

Place a soft, clean towel or cloth on the desk or surface. Hold the sides of your monitor

and gently lay it down so that the screen is against the surface and the cover is facing up.

Insert the three metal studs on the base into the corresponding holes in the stand. Then,

tighten the screw as shown to secure the stand.

Insert the two metal tabs on the stand into the corresponding holes on the rear of the

monitor. Then, pivot the stand downward until it clicks into position.

1-4

Chapter 1.