Lenovo 2448HB6 Kullanıcı Kılavuzu - Sayfa 18

Monitör Lenovo 2448HB6 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Lenovo 2448HB6 35 sayfaları. Wide flat panel monitor

Sayfayı Yazdır

Selecting a supported display mode

Understanding power management

2-6

L1951p Wide Flat Panel Monitor User's Guide

The display mode the monitor uses is controlled by the computer. Therefore, refer

to your computer documentation for details on how to change display modes.

The image size, position and shape might change when the display mode changes.

This is normal and the image can be readjusted using automatic image setup and

the image controls.

Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or

Flat Panel technology is inherently flicker-free.

Note: If your system has previously been used with a CRT monitor and is

currently configured to a display mode outside the range of this monitor, you may

need to re-attach the CRT monitor temporarily until you have re-configured the

system; preferably to

mode.

The display modes shown below have been optimized at the factory.

Table 2-3. Factory set display modes

Addressability

PAL

50Hz

640x350

70Hz

640x480

60Hz,66Hz,72Hz,75Hz

640x500

58Hz

720x400

70Hz

800x600

56Hz,60Hz,72Hz,75Hz

832x624

75Hz

1024x768

60Hz,70Hz,75Hz

1152x864

75Hz

1280x720

60Hz

1280x768

60Hz

1280x1024

60Hz,70Hz,75Hz,76Hz

1360x768

60Hz

1440x900

60Hz,R60Hz,75Hz

Power management is invoked when the computer recognizes that you have not

used your mouse or keyboard for a user-definable period. There are several states

as described in the table below.

For optimal performance, switch off your monitor at the end of each working day,

or whenever you expect to leave it unused for long periods during the day.

Table 2-4. Power indicator

State

Power Indicator

Steady green

Standby/

Steady amber

Supsend

Off

1440 x 900

at 60 Hz, which is the Native Resolution Display

Refersh rate

Screen

Restoring Operation

Normal

Blank

Press a key or move the

mouse.

There may be a slight delay

reappears.

Note: Standby also occurs

if there is no image output

to the monitor.

Off

Press power key to swich on .

There may be a slight delay

before the image reappears.

Compliance

ENERGY STAR