Lenovo 4434-HB6 Kullanıcı Kılavuzu - Sayfa 15
Monitör Lenovo 4434-HB6 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Lenovo 4434-HB6 31 sayfaları. Lenovo wide flat panel monitor user's guide
Ayrıca Lenovo 4434-HB6 için: Kullanıcı Kılavuzu (31 sayfalar)
![Lenovo 4434-HB6 Kullanıcı Kılavuzu](/uploads/products/server2/7302163/7302163.jpg)
Selecting a supported display mode
Understanding power management
2-6
L194
Flat Panel Monitor User s Guide
The display mode the monitor uses is controlled by the computer. Therefore, refer
to your computer documentation for details on how to change display modes.
The image size, position and shape might change when the display mode changes.
This is normal and the image can be readjusted using automatic image setup and
the image controls.
Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or
Flat Panel technology is inherently flicker-free.
Note: If your system has previously been used with a CRT monitor and is
currently configured to a display mode outside the range of this monitor, you may
need to re-attach the CRT monitor temporarily until you have re-configured the
system; preferably to
mode.
The display modes shown below have been optimized at the factory.
Table 2-3. Factory set display modes
Addressability
Refersh rate
640x480
60Hz, 66Hz, 72Hz, 75Hz
720x400
70Hz
800x600
60Hz, 72Hz, 75Hz
832x624
75Hz
1024x768
60Hz, 70Hz, 75Hz
1152x864
60Hz, 75Hz
1280x768
60Hz
1280x960
60Hz
1280x1024
60Hz, 70Hz, 72Hz, 75Hz
1440x900
60Hz, 75Hz
Power management is invoked when the computer recognizes that you have not
used your mouse or keyboard for a user-definable period. There are several states
as described in the table below.
For optimal performance, switch off your monitor at the end of each working day,
or whenever you expect to leave it unused for long periods during the day.
Table 2-4. Power indicator
State
Power Indicator
On
Steady green
Standby/
Steady amber
Supsend
Off
Off
1440 x 900
at 60 Hz, which is the Native Resolution Display
Screen
Restoring Operation
Normal
Blank
Press a key or move the
mouse.
There may be a slight delay
reappears.
Note: Standby also occurs
if there is no image output
to the monitor.
Off
Press a key or move the
mouse.
There may be a slight delay
before the image reappears.
Compliance
ENERGY STAR
ENERGY STAR