Lenovo 4449HB1 Kullanıcı Kılavuzu - Sayfa 25

Monitör Lenovo 4449HB1 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Lenovo 4449HB1 32 sayfaları. Wide monitor

Installing the monitor driver in Windows XP

To use the Plug and Play feature in Windows XP, files should be loaded from the

Reference and Driver CD.

Note: This section must be completed before continuing with the Windows XP

automatic image setup.

Turn off the computer and all attached devices.

Ensure that the monitor is connected correctly.

Turn on the monitor and then the system unit. Allow the system to boot into

Windows XP.

Open the Display Properties window by clicking Start

then double-clicking the Display icon.

Click the Settings tab.

Click the Advanced button.

Click the Monitor tab.

Click the Properties button.

Click the Drivers tab.

10. Open the Hardware Update Wizard window by clicking on Update Driver.

11. Select Install from a list or Specific location(Advanced), and then click Next.

12. Select "Don't search. I will choose the driver to install" option, and then click

Next.

13. Click the Have Disk button. Click on the Browse button and navigate to

the following directory:

X:\Monitor Drivers

(where X is the drive letter designator for the CD-ROM drive).

14. Select the "

LEN10B8.inf

15. Select

LEN L2021wA

your hard disk drive.

16. Close all open windows and remove the CD.

17. Restart the system. The system will automatically select the maximum refresh

rate and corresponding Color Matching Profiles.

Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display

quality. Lenovo recommends using either 1600 x 900 at a refresh rate of 60 Hz, or 640

x 480 at a refresh rate of 60 Hz.

" file and click the Open button. Click the OK button.

and click Next. The files will be copied from the CD to

Control Panel, and

Chapter 3.

3-7