Lenovo RackSwitch G8124E Hızlı Başlangıç Kılavuzu - Sayfa 4
Anahtar Lenovo RackSwitch G8124E için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Lenovo RackSwitch G8124E 7 sayfaları. 24 ports
Ayrıca Lenovo RackSwitch G8124E için: Ürün Kılavuzu (23 sayfalar)
Sayfayı Yazdır
Setup the Switch for Remote Access
Configure the IP Information
1. Login to the switch using either option in the
2. Run the commands below to configure the settings for remote access. The interface you select will depend
on how you've connected to the switch.
enable
configure device
interface <management|ethernet> <1/1>
no bridge-port
ip address <IP|DHCP>
exit
NOTE
The interface you select will depend on how you have connected to the switch (management or
ethernet).
no bridge-port is strongly recommended if you plan to use DHCP on an ethernet port.
3. You can see an output of the assigned configuration, including the IP information is using DHCP, using the
below command.
display ip interface brief
Use SSH to Access the Switch
Use the below command to SSH into the switch for access:
ssh admin@<IP>
©
Scale Computing 2018
C onnect to the
Switch
section above.
4