Dirt Devil Bandit DDBBC Kullanıcı Kılavuzu - Sayfa 5
Elektrikli Süpürge Dirt Devil Bandit DDBBC için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Dirt Devil Bandit DDBBC 17 sayfaları.
Sayfayı Yazdır
OPERATION
Assemble appliance and adjust accessories to surface
WARNING:
Danger of injury! Only attach the accessory parts when the appliance is not connected
to the power supply.
CAUTION:
Before assembling, make sure that the accessory part suits the surface to be cleaned.
NOTE:
Twist the accessory part when connecting them to
the wand or hose so they are securely in place. Ensure that
installed parts are secure by trying to pull them apart.
1. Assemble the appliance and accessory parts depending
on the surface you want to vacuum clean (Fig. 1 – 10).
2. Ensure that the auxiliary air regulator is shut (Fig. 2).
3. If you use the telescopic tube (Fig. 3), adjust its
length (Fig. 4).
4. If you use the combination floor tool (Fig. 5), using
the rocker switch, set it to the floor to be cleaned
(Fig. 6 hard floor, Fig. 7 carpet).
Connect hose to
telescopic wand.
Rocker Switch
Carpet.
dirtdevil.com.au
3
Telescopic wand
height adjust.
7
Dusting brush.
Attach hose to
vacuum cleaner.
4
Combination floor tool.
8
Crevice tool.
1
Close auxiliary
air regulator.
5
Rocker Switch
Hard floors.
9
Upholstery tool.
2
6
10
4