Nikon AF-S VR Zoom-Nikkor 70-300mm f/4.5-5.6G IF-ED Kullanım Kılavuzu - Sayfa 8
Kamera Lensi Nikon AF-S VR Zoom-Nikkor 70-300mm f/4.5-5.6G IF-ED için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Nikon AF-S VR Zoom-Nikkor 70-300mm f/4.5-5.6G IF-ED 14 sayfaları. Nikon d200: product brochure
Ayrıca Nikon AF-S VR Zoom-Nikkor 70-300mm f/4.5-5.6G IF-ED için: Broşür ve Teknik Özellikler (18 sayfalar), Kullanıcı Kılavuzu (2 sayfalar)
Sayfayı Yazdır
3. Vibration reduction mode (VR@)
IBasic concept of vibration reduction
Camera shake
En
Panning shots
Strength of vibration
IThe effects of vibration reduction
Pictures can be taken at shutter speeds approx. 4 stops* slower than is possible
without using a VR2 lens.(*Under Nikon measurement conditions. The effects of
vibration reduction vary depending on individual and shooting conditions.)
ISetting the vibration reduction ON/OFF switch
1 Set the Vibration reduction ON/OFF switch ( to [ON].
Note: Be sure to set the switch so that the indicator aligns
with [ON] precisely.
2 Vibration is reduced when the shutter release button is lightly
pressed. Because vibration is reduced in the viewfinder, auto/manual
focusing and exact framing of the subject are made easier.
3 To cancel the vibration reduction mode, set the Vibration
reduction ON/OFF switch ( to [OFF].
ISetting the vibration reduction mode switch &
NORMAL: The vibration reduction mechanism primarily reduces
camera shake, making smooth panning shots
possible.
ACTIVE:
The vibration reduction mechanism reduces camera
shake when taking pictures and those from a moving
vehicle. In this mode, the lens does not automatically
distinguish panning from camera shake.
Note: Be sure to set the switch so that the indicator aligns with
[NORMAL] or [ACTIVE] precisely.
18
Set the vibration reduction mode
switch to [NORMAL].
Camera shake
Set the vibration reduction mode
when taking pictures
switch to [ACTIVE].
from a moving
vehicle
When taking pictures
Set the vibration reduction mode switch
to either [NORMAL] or [ACTIVE]
When taking panning shots
Set the vibration reduction mode switch
to [NORMAL].
When taking pictures from a moving vehicle
Set the vibration reduction mode switch
to [ACTIVE].
ON
NORMAL ACTIVE
Indicator
OFF
Indicator