Nikon NIKKOR Z 14-24mm f/2.8 S Kullanıcı Kılavuzu - Sayfa 3

Kamera Lensi Nikon NIKKOR Z 14-24mm f/2.8 S için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Nikon NIKKOR Z 14-24mm f/2.8 S 4 sayfaları.

Sayfayı Yazdır

Nikon NIKKOR Z 14-24mm f/2.8 S Kullanıcı Kılavuzu

User's Manual

Before using this product, please read these instructions carefully. You will also need to

consult the camera manual.

• This lens is intended exclusively for use with mirrorless cameras featuring a Nikon Z mount.

• Update the camera ﬁ rmware to the latest version. With earlier versions, the camera

may fail to detect the lens correctly and some features may not be available. The latest

version of the camera ﬁ rmware can be downloaded from the Nikon Download Center

at the URL below.

https://downloadcenter.nikonimglib.com/

For Your Safety

To prevent damage to property or injury to yourself or to others, read "For Your Safety"

in its entirety before using this product.

Keep these safety instructions where all those who use this product will read them.

A WARNING: Failure to observe the precautions marked with this icon could

result in death or severe injury.

A CAUTION: Failure to observe the precautions marked with this icon could

result in injury or property damage.

A WARNING

WARNING

• • Do not disassemble or modify this product.

Do not disassemble or modify this product.

Do not touch internal parts that become exposed as the result of a fall or

other accident.

Failure to observe these precautions could result in electric shock or other injury.

• • Should you notice any abnormalities such as the product producing smoke,

Should you notice any abnormalities such as the product producing smoke,

heat, or unusual odors, immediately disconnect the camera power source.

Continued operation could result in ﬁ re, burns or other injury.

• • Keep dry.

Keep dry.

Do not handle with wet hands.

Failure to observe these precautions could result in ﬁ re or electric shock.

• • Do not use this product in the presence of ﬂ ammable dust or gas such as

Do not use this product in the presence of ﬂ ammable dust or gas such as

propane, gasoline or aerosols.

Failure to observe this precaution could result in explosion or ﬁ re.

• • Do not directly view the sun or other bright light source through the lens.

Do not directly view the sun or other bright light source through the lens.

Failure to observe this precaution could result in visual impairment.

• • Keep this product out of reach of children.

Keep this product out of reach of children.

Failure to observe this precaution could result in injury or product malfunction. In

addition, note that small parts constitute a choking hazard. Should a child swallow

any part of this product, seek immediate medical attention.

• • Do not handle with bare hands in locations exposed to extremely high or

Do not handle with bare hands in locations exposed to extremely high or

low temperatures.

Failure to observe this precaution could result in burns or frostbite.

A CAUTION

CAUTION

• • Do not leave the lens pointed at the sun or other strong light sources.

Do not leave the lens pointed at the sun or other strong light sources.

Light focused by the lens could cause ﬁ re or damage to product's internal parts.

When shooting backlit subjects, keep the sun well out of the frame. Sunlight

focused into the camera when the sun is close to the frame could cause ﬁ re.

• • Do not leave the product where it will be exposed to extremely high

Do not leave the product where it will be exposed to extremely high

temperatures, for an extended period such as in an enclosed automobile

or in direct sunlight.

Failure to observe this precaution could result in ﬁ re or product malfunction.

• • Do not transport cameras or lenses with tripods or similar accessories

Do not transport cameras or lenses with tripods or similar accessories

attached.

Failure to observe this precaution could result in injury or product malfunction.

Notices for Customers in the U.S.A.

This device complies with part 15 of the FCC Rules. Operation is subject to the follow-

ing two conditions: (1) this device may not cause harmful interference, and (2) this

device must accept any interference received, including interference that may cause

undesired operation.

Federal Communications Commission (FCC) Radio Frequency Interference

Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reason-

able protection against harmful interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communica-

tions. However, there is no guarantee that interference will not occur in a particular instal-

lation. If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment oﬀ and on, the user is encouraged to

try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit diﬀ erent from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/television technician for help.

CAUTIONS

Modi cations

The FCC requires the user to be notiﬁ ed that any changes or modiﬁ cations made to

this device that are not expressly approved by Nikon Corporation may void the user's

authority to operate the equipment.

Nikon Inc., 1300 Walt Whitman Road,

Melville, New York 11747-3064, U.S.A.

Tel.: 631-547-4200

Notice for Customers in Canada

CAN ICES-3 B / NMB-3 B

Using the Lens

Parts of the Lens: Names and Functions (Figure 1)

Refer to the diagram on the left edge of this sheet.

Lens hood mounting

Use when attaching the lens hood.

mark

Use for manual focus.

• When focusing using autofocus, you can ad-

just focus manually by rotating the ring while

Focus ring

the shutter-release button is pressed halfway;

after focusing, press the shutter-release button

the rest of the way down to shoot.

Zoom ring

Rotate to zoom in or out.

Focal length scale

Determine the approximate focal length when

zooming the lens in or out.

Focal length mark

View focus distance, depth of ﬁ eld, and other

Lens info panel

information.

Rotate to adjust a setting such as [Aperture] or

[Exposure compensation] assigned using the

camera. For more information, see the descrip-

Control ring

tion of [Custom control assignment], [Custom

controls], or [Custom controls (shooting)] in the

camera manual.

Save settings or choose the information shown

Display button

in the lens info panel.

Press to perform a function assigned using the

camera. For more information, see the descrip-

L-Fn button

tion of [Custom control assignment], [Custom

controls], or [Custom controls (shooting)] in the

camera manual.

Choose a focus mode.

Focus-mode switch

• A: Autofocus

• M: Manual focus

Note that regardless of the setting chosen, focus

must be adjusted manually when manual focus

mode is selected using camera controls.

Lens mounting mark Use when mounting the lens on the camera.

Rubber lens-mount

—

gasket

CPU contacts

Used to transfer data to and from the camera.

Filter slot

For use with trimmable third-party ﬁ lter sheets.

Lens cap (rear cap)

Use to protect the rear lens element.

LC-Z1424 and

Use to protect the front lens element.

LC-K104 lens caps

• The LC-K104 is for use with the HB-97 lens hood. See

(front caps)

Lens hoods block stray light that would other-

HB-96/HB-97

wise cause ﬂ are or ghosting. They also serve to

lens hood

protect the lens.

• The HB-97 is for use with Nikon screw-on ﬁ lters.

Lens hood lock

Use when removing the lens hood.

release button

Lens hood lock mark

Use when attaching the lens hood.

Lens hood alignment

mark

Attachment and Removal

Attaching the Lens

Turn the camera o , remove the body cap, and detach the rear lens cap.

Position the lens on the camera body, keeping the mounting mark

on the lens aligned with the mounting mark on the camera body,

and then rotate the lens counterclockwise until it clicks into place.

Removing the Lens

Turn the camera o .

Press and hold the lens release button while turning the lens clockwise.

Attaching and Removing the Front Lens Cap (Figure 2)

Attaching the Front Lens Cap

Keeping the latches squeezed together (q) and the top of the cap aligned with

the lens hood mounting mark, attach the caps in the orientations shown (w).

Removing the Front Lens Cap

Keeping the latches squeezed together (q), remove the lens caps as shown (w).

The Lens Info Panel

The lens Info panel lights when the lens is attached to a camera and the camera is on.

• Press the lens display button to cycle the display as shown:

Focus distance

Depth of ﬁ eld

Aperture

1 Depth of ﬁ eld is displayed when the camera is in mode A or M.

2 Aperture is displayed only when the cam-

era is in mode A or M. The display for other

modes is shown in the illustration.

• The focus mode (AF or MF) is brieﬂ y displayed when chosen using the focus-

mode switch.

• The panel turns oﬀ automatically when the camera standby timer expires or if

no lens operations are performed for about 10 seconds. Press the display button

to reactivate the display.

The Lens Info Panel

The focus distance, depth of ﬁ eld, and other information displayed in the lens Info panel are approxima-

tions only.

Panel Options

Follow the steps below to choose the units for focus distance from meters (m) or

feet (ft) or adjust the brightness of the lens Info panel.

Press and hold the display button to view settings.

• Unit or brightness selection options will be displayed. The currently select-

ed item will ﬂ ash.

• Press the display button to toggle between displays.

Units

Choose a setting using the lens control ring.

Units

- Rotate the control ring to choose from me-

ters (m) or feet (ft).

See

Brightness

- Rotate the control ring in the "+" (brighter)

or "−" (darker) direction.

- Choose from 6 levels of brightness.

—

- To turn the lens info panel oﬀ , rotate the

ring in the "−" direction until the

icon

changes to

—

• Press the display button to save changes and toggle the display.

• If no operations are performed using lens controls for about 5 seconds,

—

panel options will clear from the display. Any changes will be lost.

Press and hold the display button to return to the lens information display.

• Choosing

for brightness turns the lens info panel oﬀ . To turn the display

See

on again, press and hold the display button.

Attaching and Removing the Lens Hood

Attaching the Lens Hood (Figure 3)

—

• q Align the lens hood mounting mark (●) with the lens hood alignment mark

(●) and w rotate the lens hood in the direction shown until e the mounting

mark (●) is aligned with the lens hood lock mark ( ).

• Gripping the front too tightly makes the lens hood diﬃ cult to attach or remove. When

See

rotating the lens hood, hold it near the lens hood alignment mark (●) on its base.

• The lens hood can be reversed and mounted on the lens when not in use. Before re-

versing the HB-97, be sure to remove any Nikon screw-on ﬁ lters that may be attached.

Removing the Lens Hood (Figure 4)

—

• Keeping the lens hood lock release button pressed (q), rotate the lens hood in

the direction shown (w) and remove it from the lens (e).

• The same procedure can be used when the lens hood is reversed.

Using Filters

Filters can be attached to the lens at the front and rear. Nikon 112 mm screw-on

ﬁ lters can be used at the front of the lens and third-party trimmable ﬁ lter sheets at

—

the rear. These can be attached as follows:

Nikon Screw-on Filters

Nikon screw-on ﬁ lters can be attached to the HB-97 lens hood (Figure 5).

See

• Use only one Nikon screw-on ﬁ lter at a time.

Screw-on Filters

—

Shadows may appear at the periphery of pictures taken with third-party screw-on

—

ﬁ lters.

Filter Sheets

See

The rear mount opening has a ﬁ lter slot. Cut third-party trimmable ﬁ lter sheets to

the size shown in Figure 6 and insert them in the ﬁ lter slot (Figure 7).

—

When the Lens Is Attached

The focus position may change if you turn the camera oﬀ and then on again after fo-

cusing. If you have focused on a pre-selected location while waiting for your subject to

appear, we recommend that you do not turn the camera oﬀ until the picture is taken.

Cameras with AF-Assist Illuminators

The lens or lens hood may block the light from the camera AF-assist illuminator.

See

• For the latest information on using the lens with cameras that have built-in AF-assist

illuminators, visit the site below.

https://downloadcenter.nikonimglib.com/

Using the Lens on Cameras with a Built-in Flash

Shadows will be visible in photos where light from the built-in ﬂ ash is obscured by the

lens or lens hood. Remove the lens hood before shooting. Note, however, that depend-

ing on lens focal length and the distance to the subject, shadows may appear even

when the lens hood is removed.

• Shadows will be visible in photos taken when this lens is mounted on a Z 50.

• For the latest information on focal lengths and subject distances at which shadows

will not appear in photos taken with a built-in ﬂ ash, visit the site below.

https://downloadcenter.nikonimglib.com/

Precautions for Use

• Do not pick up or hold the lens or camera using only the lens caps or lens hood.

• Keep the CPU contacts clean.

• Should the rubber lens-mount gasket be damaged, cease use immediately and take

the lens to a Nikon-authorized service center for repair.

• Replace the lens caps when the lens is not in use.

• Do not leave the lens in humid locations or in locations in which it may be exposed to

moisture. Rusting of the internal mechanism can cause irreparable damage.

• Do not leave the lens next to open ﬂ ames or in other extremely hot locations. Ex-

treme heat could damage or warp the reinforced plastic exterior.

• Rapid changes in temperature may cause damaging condensation inside and outside

the lens. Before taking the lens from a warm to a cold environment or vice versa, place

it in a bag or plastic case to slow the change in temperature.

• We recommend that you place the lens in its case to protect it from scratches during transport.

Lens Care

• Removing dust is normally suﬃ cient to clean the glass surfaces of the lens.

• The uorine-coated front lens element can be cleaned as described below.

- Smudges, ﬁ ngerprints, and other oily stains can be removed using a soft, clean cotton cloth

or third-party lens cleaning tissue; clean from the center outwards using a circular motion.

- To remove stubborn stains, wipe gently using a soft cloth lightly dampened with a

small amount of distilled water, ethanol, or lens cleaner.

- Any drop-shaped marks left from this process on the water- and oil-repellent sur-

face can subsequently be removed with a dry cloth.

• When cleaning the rear lens element, which is not uorine-coated, remove smudges, ﬁ ngerprints,

and other oily stains using a soft, clean cotton cloth or third-party lens cleaning tissue

lightly dampened with a small amount of ethanol or third-party lens cleaner. Wipe

Focal length

gently from the center outwards in a circular motion, taking care not to leave smears

or touch the lens with your ﬁ ngers.

• Never use organic solvents such as paint thinner or benzene to clean the lens.

• Nikon Neutral Color (NC) ﬁ lters and the like can be used to protect the front lens element.

• Do not store with naphtha or camphor moth balls or in direct sunlight. If the lens will not

be used for an extended period, store it in a cool, dry location to prevent mold and rust.

Accessories

Supplied Accessories

• LC-Z1424 Lens Cap (front cap)

• LC-K104 Lens Cap (front cap)

• LF-N1 Lens Cap (rear cap)

• HB-96 Lens Hood

• HB-97 Lens Hood

• CL-C2 Lens Case

Using the Lens Case

• The case is intended to protect the lens from scratches, not from falls or other physical shocks.

• The case is not water resistant.

• The material used in the case may fade, bleed, stretch, shrink, or change color when rubbed or wet.

• Remove dust with a soft brush.

• Water and stains can be removed from the surface with a soft, dry cloth. Do not use alcohol, benzene, thinner,

or other volatile chemicals.

• Do not store in locations exposed to direct sunlight or high temperatures or humidity.

• Do not use the case to clean the monitor or lens elements.

• Be careful that the lens does not fall from the case during transport.

Material: Polyester

Compatible Accessories

Brightness

• Nikon 112 mm screw-on ﬁ lters (must be attached to the HB-97 lens hood)

• Trimmable ﬁ lter sheets

Specifi cations

Mount

Nikon Z mount

Focal length

14 – 24 mm

Maximum

f/2.8

aperture

Lens construction 16 elements in 11 groups (including 4 ED elements, 3 aspherical elements, ele-

Lens construction

ments with Nano Crystal and ARNEO coats, and a ﬂ uorine-coated front lens element)

Angle of view

• FX format: 114°–84°

• DX format: 90°–61°

Focal length scale Graduated in millimeters (14, 15, 16, 18, 20, 24)

Focal length scale

Focusing system Internal focusing system

Focusing system

Minimum focus

0.28 m (0.92 ft) from focal plane at all zoom positions

distance

Maximum repro-

0.13× (24 mm focal length)

duction ratio

Diaphragm

9 (rounded diaphragm opening)

blades

Aperture range

f/2.8 – 22

Filter slot

Located at rear of lens

Dimensions

Approx. 88.5 mm/3.5 in. maximum diameter × 124.5 mm/5 in.

(distance to end of lens from camera lens mount ﬂ ange)

Weight

Approx. 650 g (1 lb 7 oz)

Nikon reserves the right to change the appearance, speciﬁ cations, and performance of this

product at any time and without prior notice.