Nikon Eclipse E600 Talimatlar Kılavuzu - Sayfa 21

Mikroskop Nikon Eclipse E600 için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. Nikon Eclipse E600 37 sayfaları. Teaching head/multi teaching head
Ayrıca Nikon Eclipse E600 için: Talimatlar Kılavuzu (38 sayfalar), Talimatlar Kılavuzu (37 sayfalar), Talimatlar Kılavuzu (21 sayfalar)

Sayfayı Yazdır

7 | Filters

Three filters are housed in the base of the microscope.

A filter is inserted into the optical path by pressing in the filter insertion lever on the right side of the

microscope.

The filter is removed from the optical path by pressing the release lever down.

NCB11 (color balancing filter) | For color balance adjustment and color photomicrography

ND16 (transmission rate: 6%) | For brightness adjustment

ND4 (transmission rate: 25%)

| For brightness adjustment

A diffuser is contained in the microscope.

When removing the diffuser from the optical path, turn

the diffuser insertion/removal screw as far as it will go (about 90°) in the counter-clockwise direc-

tion with a hexagonal screwdriver.

When returning the diffuser to the optical path, turn the screw as

far as it will go in the clockwise direction.

| 8

Stage

1. Adjusting the torque of the stage motion control knobs

[HH

The torque of the X-axis and Y-axis stage motion control knobs can be adjusted.

Adjusting the torque for Y-axis stage motion

To increase the torque of the Y-axis, turn Knob B

in the direction of arrow "a" while holding Knob

Knob A

A; to reduce the torque, turn Knob B in the oppo-

site direction.

Knob B

Adjusting the torque for X-axis stage motion

To increase the torque of the X-axis, turn Knob C

in the direction of arrow "b" while holding Knob

You

D; to reduce the torque, turn Knob C in the oppo-

1011

Knob C

site direction.

Tri

Knob D