Nikon Eclipse E600W Talimatlar Kılavuzu - Sayfa 7

Mikroskop Nikon Eclipse E600W için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. Nikon Eclipse E600W 21 sayfaları. Teaching head/multi teaching head

Sayfayı Yazdır

Components of the System

If the system has not yet been assembled, see section "III. Assembly" first.

For details on assembling and handling the microscope, see the instruction manual supplied with

the microscope.

This attachment can be mounted on the ECLIPSE E600W, E600 or E400 microscope. Note that

the illustrations in this manual shows the ECLIPSE E600 microscope for convenience. (The

microscopes ECLIPSE E800 and E1000 only allow mounting of the dual-viewing (side-by-side)

attachment. The inverted microscopes TE300 and TE200 only allow mounting of the dual-

viewing (side by side), the triple-viewing and the multi-viewing (for 5 persons) attachment.

Separately available components are required for mounting on these microscopes. For details,

see P.12.)

Depending on the type of set you have purchased, some of the following components may not be

included.

Dual-viewing (face-to-face)

Heat protection

shield

Dual-viewing (side-by-side)

Mounting ring

Height adjustment

clamp screw

This model allows the main observer and the secondary observer to

be positioned face-to-face during observation.

Components

1) Microscope

2) Teaching head F-F

3) Pointer

4) AC adapter

5) Eyepiece tube for secondary observer

6) Eyepieces for secondary observer

This model allows the main observer and the secondary observer to

be positioned side-by-side during observation.

This model can also be mounted on the microscopes ECLIPSE

E800, E1000 and the inverted microscopes TE300 and TE200 with

the separately available components. (Please refer to P.12 for

details.)

When a pointer is going be used, assemble the system so that the

secondary observer will be positioned on the right. If reversed, the

pointer control section will be at the rear of the microscope.