Nikon SMZ660 Talimatlar Kılavuzu - Sayfa 6

Mikroskop Nikon SMZ660 için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. Nikon SMZ660 29 sayfaları. Stereoscopic zoom microscope

1. Installation location

Note the following points when installing the stereoscopic

microscope.

• Install the microscope in a location with the temperature between

• Do not install the microscope in a location subject to direct

• Install the microscope in a location that is not subject to vibration.

• Install the microscope in a location that is free from dust and dirt.

2. Handle the microscope carefully

The stereoscopic microscope is a precision optical instrument.

Handle it carefully and do not subject it to impact. Shock from

impact during transportation or operation as well as forcible

operations may cause damage to the instrument.

3. Cleaning the lenses

Do not let dust, fingerprints, etc. to get on the lenses. Dirt on the

lenses will adversely affect the view of the image. If any lenses

become dirty, clean them as described below.

• Use an air blower to blow dust away. If this does not suffice, brush

• Only if the lenses become dirty with fingerprints or grease stains,

• Since absolute alcohol is highly flammable, be careful in handling

• Observe the manufacturer's handling instructions when handling

0° and 40°C, and humidity of less than 80%. If installed in a hot

and humid location, mold may form on the lenses or condensation

may occur inside, resulting in reduced performance or damage to

the microscope.

sunlight.

away the dust with a soft brush or gently wipe it away with a piece

of gauze.

slightly dampen a piece of soft, clean cotton cloth with absolute

alcohol (ethyl alcohol or methyl alcohol) and gently wipe away the

dirt. Do not use the same part of the cloth more than once.

it so that it does not ignite.

absolute alcohol.