Nikon MONARCH 2000 Kullanım Kılavuzu - Sayfa 19

Ölçüm Cihazları Nikon MONARCH 2000 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Nikon MONARCH 2000 25 sayfaları.

Single measurement

Pressing the PWR button once starts single measurement, then displays the results.

• If measurement fails, measurement continues automatically for up to about 4 seconds until results are

obtained. Measurement stops when it is successful, even within about 4 seconds.

Continuous measurement

Press and hold down the PWR button to start continuous measurement up to approx. 8 seconds. During

measurement, the measured result is displayed consecutively while the laser irradiation mark is blinking. If

you release your finger from the button, continuous measurement stops.

Standby

* If measurement fails, measurement continues automatically for up to about 4 seconds until results are

obtained.

Example of measured

distance display

Press the PWR button once

Press and hold down the PWR

button

Example of measurement

failure

Single measurement*