Nikon LaserForce Kullanım Kılavuzu - Sayfa 10

Dürbünler Nikon LaserForce için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Nikon LaserForce 26 sayfaları. 10x42 rangefinder binoculars

Changing the settings

1. Turn on the power.

2. Press and hold the MODE button to be able to change the settings.

3. Perform the operations below to switch the mode or settings.

• Pressing the MODE button: Switches the mode.

• Pressing the PWR button: Switches the setting of the displayed mode.

* If you press and hold the MODE button or if you do not operate the button for about 8 seconds, the product returns to

standby.

* Operating the MODE button

There are two ways to press the MODE button. Operate the button while following the descriptions in this manual.

• "Press and hold" means to continue pressing the button for 1.5 seconds or longer.

• "Press" means to press the button quickly (less than 1.5 seconds).

Outline for operating the mode settings

Internal display luminance:IL

Press and hold MODE

Standby

button for 1.5 seconds

or longer.

Distance display unit:F1

Measurement display mode:F2

Press and hold MODE button.

Press MODE button.

Press PWR button.

* While operating the mode settings, if you press and hold the MODE button or if you do not operate the button for about

8 seconds, the product returns to standby.

* When you change the setting of a mode, that setting will be displayed first the next time you select that mode.

IL4

IL1

IL2

IL3

Y (yard)

M (meter)

(

hidden)

(horizontal

(actual distance)

distance)