Dirt Devil FD50100 Manuel - Sayfa 17

Elektrikli Süpürge Dirt Devil FD50100 için çevrimiçi göz atın veya pdf Manuel indirin. Dirt Devil FD50100 20 sayfaları. Carpet washer

REPLACE THE BELT

1. Take off cover (Refer to

page 16). Remove and

toss the old belt out.

3. With belt in place, pull and

slide brushroll into the

nozzle, making sure that

the brushroll ends are in

the correct orientation (A).

Any other servicing should be done by an authorized service representative. If appliance is not

working as it should, has been dropped, damaged, left outdoors, or dropped into water,

take it to a service center prior to continuing use.

2. Place the new belt on

4. Replace belt cover and

the motorshaft, then slip

it in the area without

brushroll bristles.

secure with the three

screws.