Dirt Devil collector of garbage Kullanıcı El Kitabı - Sayfa 2

Üfleyici Dirt Devil collector of garbage için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Dirt Devil collector of garbage 8 sayfaları.

THIS PRODUCT IS INTENDED FOR HOUSEHOLD USE ONLY.

IMPORTANT SAFETY INSTRUCTIONS

When you use this product, basic precautions should always be followed,

including the following:

• READ ALL INSTRUCTIONS BEFORE USING THIS PRODUCT.

• ALWAYS FOLLOW THESE SAFETY INSTRUCTIONS.

WARNING: TO REDUCE THE RISK OF FIRE,

ELECTRIC SHOCK OR INJURY:

• Know your tool

Read and understand the owners manual and labels affixed to the tool. Learn its

application and limitations as well as its specific potential hazards.

• Keep guards in place.

Keep in good working order, properly adjusted and aligned.

• Don't force tool.

It will do the job better and safer at the rate for which it was designed.

• Wear proper apparel.

Do not wear loose clothing, gloves, neckties or jewelry (rings, watch) which may

get caught in moving parts. Non-slip footwear is recommended. Wear protective

hair covering to contain long hair. Roll up long sleeves above the elbows.

• Always wear safety glasses.

Also use a face or dust mask if cutting operation is dusty. Always wear safety

glasses (ansi z87.1). Everyday eyeglasses only have impact resistant lenses, they

are not safety glasses.

• Don't overreach.

Keep proper footing and balance at all times.

• Maintain tool with care.

Keep tools sharp and clean for best and safest performance. Follow instructions

for lubricating and changing accessories.

• Disconnect tools.

Before servicing, when changing accessories or attachments.

• Avoid accidental starting.

Make sure the swich is in the ''off'' position before plugging in.

• Check damaged parts.

Before further use of the tool, a guard or other parts that are damaged should

be carefully checked to ensure that they will operate properly and perform their

intended function. Check for alignment of moving parts, binding of moving parts,

breakage of parts, mounting, and any other conditions that may affect its opera-

tion. A guard or other parts that are damaged should be properly repaired or

replaced.

• Never leave machine running unattended. Turn power off. Don't leave any tool

running until it comes to a complete stop.

• Do not operate power tools in explosive atmospheres, such as in the presence

of flammable liquids, gases, or dust. Power tools create sparks which may ignite

the dust or fumes.