Dirt Devil 299e Kullanım Talimatları Kılavuzu - Sayfa 7

Merkezi Vakum Sistemleri Dirt Devil 299e için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Dirt Devil 299e 16 sayfaları. Central vacuums, filtered cyclonic, disposable bag
Ayrıca Dirt Devil 299e için: Kullanım Talimatları Kılavuzu (16 sayfalar)

Sayfayı Yazdır

DIRT DEVIL

Central Vacuums

Emptying the Dirt

Canister & Replacing the

Filter Cartridge

For Filtered Cyclonic

599e, 799e, 1099e, 390, 690, 990, 1490,

CV1800, CV2200, CV2600 & CV3400

The dirt canister – where the vacuumed dirt

is deposited – is the removable lower portion

of the power unit. The canister needs to be

removed and emptied when it is 2/3 full. The

filter cartridge should be replaced once a year.

NOTE: When the dirt canister is removed the

Cyclonic Cone will be visible. The cone is held

in place with a friction seal designed to hold

the cone to the body of the power unit when

the canister is removed. The cone can be

removed by pulling on it. This allows access to

the replaceable pleated filter.

Follow these steps

(refer to Figures #1, #2, #3 and #4)

Make sure the power unit is OFF.

1. Unlatch and remove the dirt canister.

Latches are located on opposite sides of

the power unit.

(Figure #1)

2. Remove the cyclonic cone.

3. Turn the filter latch (counter-clockwise) on

the bottom of the filter and align it with

the slots in the filter base.

4. Remove the old filter and replace it with a

new pleated filter. Use filter part number

8106-01 for models 299e, 390, 690,

990, CV1800, CV2200, CV2600 and filter

part number 8107-01 for models 599e,

799e, 1099e, 1490 and CV3400.

(Figure #4)

5. Lock the filter in place by turning the

filter latch clockwise until you feel it snap.

(Figure #3)

6. Dispose of the dirt and debris captured in

the dirt canister.

7. Seat the cyclonic cone in the dirt canister.

8. Raise the dirt canister to the base of

the power unit and engage the latches.

Be certain the dirt canister is "seated"

properly to the gasket on the body of the

power unit.

Models: 299e,

(Figure #2)

(Figure #3)

Figure #1

Cyclonic

Cone

Figure #2

Figure #3

Figure #4