Armstrong Emech F2 Kurulum, Çalıştırma ve Bakım Kılavuzu - Sayfa 17

Kontrol Ünitesi Armstrong Emech F2 için çevrimiçi göz atın veya pdf Kurulum, Çalıştırma ve Bakım Kılavuzu indirin. Armstrong Emech F2 20 sayfaları. Steam water mixing valve

Armstrong Emech F2 Kurulum, Çalıştırma ve Bakım Kılavuzu

Important Notice

Armstrong's products are capable of being used in many different types of industrial applications and
operating environments. Consequently, Armstrong is only able to provide general guidelines concerning
the suitability and use of its products. It is not possible for Armstrong to provide specific guidelines for
specific applications and operating environments simply because there are too many of them. Therefore,
proper selection of a specific product for a specific application and operating environment, and its
compatibility with other equipment to which it is attached, is the customer's responsibility. The customer
must assume the ultimate responsibility for the proper sizing, selection, compatibility, installation and
operation of Armstrong products. All operating parameters should be validated for the customer's
application by a professional engineer, qualified installer or by another technical expert. Armstrong does
not warrant the performance of its products or their suitability for a particular purpose.
Although the information is believed to be accurate, Armstrong accepts no liability for any errors or
omissions. Armstrong has endeavored to provide timely information but it cannot represent that the
information is complete. The information shall not be deemed a warranty, representation or guarantee
concerning a product's suitability or fitness for a customer's specific purpose. Armstrong does not warrant
the information or any particular benefits that the customer will derive. It is the customer's responsibility to
determine the suitability for its own use of the products described herein.
The customer must make its own independent judgment and assessment and should not rely upon any
opinions, interpretations, statements, assurances or representations given.
Because Armstrong is continually improving and upgrading its products, the specifications, dimensions
and information contained herein are subject to change without notice. This information is intended to
provide general guidance to the customer. For specific guidance or support, contact Armstrong or its
authorized representative.
Installation is entirely at the customer's risk. Armstrong accepts no liability for direct, indirect, incidental,
special, or consequential damages resulting from the customer's failure to follow Armstrong's warnings,
instructions and procedures or such other procedures generally applicable to equipment of the same
type. The foregoing limitation extends to damages to person or property as well as loss of profits, loss of
products, loss of operations, the cost of alternative arrangements and loss of time, whether incurred by
the customer, its employees or a third party.
Armstrong products should be installed by qualified technicians only. Do not attempt installation unless
you are a qualified technician. Armstrong accepts no liability for damages resulting from faulty installation.
Nothing in this document is intended to cancel, modify or supersede the terms of the Armstrong Limited
Warranty and Remedy.
Armstrong International
221 Armstrong Blvd., Three Rivers, Michigan, 49093 - USA
Phone (269) 279-3602 Toll Free (888) HOT-HOSE (468-4673)
Designs, materials, weights and performance ratings are
approximate and subject to change without notice. Visit
armstronginternational.com/emech for up-to-date information.
17