Armstrong Rada 320D Kurulum ve Bakım Kılavuzu - Sayfa 15
Kontrol Ünitesi Armstrong Rada 320D için çevrimiçi göz atın veya pdf Kurulum ve Bakım Kılavuzu indirin. Armstrong Rada 320D 20 sayfaları. Water temperature controls groups of fixtures - thermostatic
Ayrıca Armstrong Rada 320D için: Kurulum ve Bakım Kılavuzu (12 sayfalar), Kurulum ve Bakım Kılavuzu (20 sayfalar)
Sayfayı Yazdır
Step 2
'H' and 'C' marked on
cartridge. Make sure that
the 'H' is lined up with the
hot inlet and that the 'C' is
lined up with the cold inlet
Disassembly
1.
Unscrew the knob using a 3mm Allen Key.
2.
Remove the Knob and Hub.
3.
Remove Temperature Indicator Trim.
4.
Remove the cartridge assembly by first removing the six phillips head-retaining screws and then smoothly
drawing the cartridge out. Do not twist or apply "side load" leverage when extracting the cartridge.
5.
When installing a new or reinstalling an existing cartridge note the raised "H" on the hot inlet of the cartridge
and align to hot supply accordingly. Conversly, align raised "C" with cold supply.
15