DIRTY HANDS 107555 Kullanım Kılavuzu - Sayfa 7

Tiller DIRTY HANDS 107555 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. DIRTY HANDS 107555 20 sayfaları. 14”-22” adjustable front tine tiller

Sayfayı Yazdır

Unpacking and Assembly

Your tiller will require some assembly. The following instructions will

help you unpack your tiller, assemble and adjust the depth regulator

lever, cable tension and handlebar height. You will need a wrench,

small adjustable crescent wrench and a starbit driver to complete the

assembly.

Unpacking

Open top of carton and remove the tiller components.

Tiller Components

Upper Handlebar Left

Upper Handlebar Right

Handlebar Support Bracket

Handlebar Bridge

Depth Regulator

Safety Shields

Tine Blades (4)

Hardware Kit

DO NOT ADD ENGINE OIL TO THE

TRANSMISSION GEAR CASE

The tiller transmission is filled at the factory.

DO NOT ATTEMPT TO START ENGINE

BEFORE ADDING OIL TO ENGINE

The engine is shipped from the factory without oil. You must add

engine oil before starting the engine. Use only the recommended

weight of oil for a 4-cycle engine (See Engine Operation Manual).

CAUTION