DIS Sensors QG40N Kullanıcı Kılavuzu - Sayfa 5

Aksesuarlar DIS Sensors QG40N için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DIS Sensors QG40N 15 sayfaları. Tilt/acceleration switch (sil1 plc)
Ayrıca DIS Sensors QG40N için: Kullanıcı Kılavuzu (5 sayfalar), Kullanım ve Güvenlik Kılavuzu (6 sayfalar)

Sayfayı Yazdır

3 Quick Reference

• One housing type: 40x40mm plastic.

• Two types of Tilt switch:

1-axis (vertical plane) up to ±170° range, outputs 2x NPN or 2xPNP

2-axis (horizontal plane) up to ±80° range, outputs 2x NPN or 2xPNP

• Two types of Acceleration switch:

2-axis (horizontal plane) up to 7g, outputs 2x NPN or 2xPNP

3-axis (omnidirectional) up to 7g, outputs 2x NPN or 2xPNP

• Available with M12 connector or cable with open ended wires.

• Programmable parameters: switch points, delay times, filtering etc.

• Optional QG40N configurator: support tilt switch only.

• Safety level: SIL CL 1 / PLc

• Output load: withstand 200mA continuous, all outputs simultaneously.

• Zeroing adjustment available via separate input.

• Default bandwidth of Tilt Switch: 0.7Hz, sample rate of MEMS: 3200Hz.

• Bandwidth Acceleration Switch: 1600Hz, sample rate of MEMS: 3200Hz.

• Output filter(only for tilt switch): adjustable 1st order low-pass filter.

•

The calculated MTTFd of the sensor is specified in the datasheet.

DIS SENSORS BV

User Manual - QG40N Tilt/Acceleration Switch (SIL1 PLc) V2.0