Disaster Area Designs NNB Kullanıcı Kılavuzu - Sayfa 4
Kayıt Ekipmanları Disaster Area Designs NNB için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Disaster Area Designs NNB 6 sayfaları. Expanse bridge
Sayfayı Yazdır
4
of
6
3. Operation and Use
The NNB is capable of controlling any Neunaber Technology pedal that incorporates the square RJ45 connector on its back
panel (hereafter called Expanse Pedals). This connector supplies power to the NNB and receives control signals from it over
a standard CAT5E cable. In order to access the full potential of your Expanse pedal, you must connect it to your computer
and run the Neunaber Expanse software to load additional effects algorithms. Once the pedal is programmed you may use
the NNB by itself to control the Expanse Pedal or in conjunction with a MIDI controller to access the pedal settings remotely.
To Program your Expanse Pedal
Connect the NNB to your Expanse Pedal
Attach power and USB to your Expanse Pedal
On the NNB, select the effect you wish to program — these are indicated by the Red / Green / Blue / White LED.
In Expanse Software, the Update button will reflect the effect number to be programmed. You may now select your effect and program it
into the pedal.
To Use the NNB as a Standalone Controller
Connect the NNB to your Expanse Pedal
Connect power and signal cables to your Expanse Pedal
Tap or hold the switch on the NNB to select the desired preset or effect setting — see the section titled "Configuring the NNB" for details
on the various options for control.
Connect an expression pedal or footswitch to the MultiJack to unlock additional functions — see the section titled "Configuring the NNB"
for details on the options for the MultiJack.
To Use your Expanse Pedal with your MIDI Controller
Connect your MIDI controller MIDI Output to the NNB MIDI Input
Connect the NNB to your Expanse Pedal
Connect power and signal cables to your Expanse Pedal
Send a program change message from your MIDI controller to the MIDI channel of the NNB, the default channel is 1.
The Expanse Pedal should change itself setting to the program selected.
Disaster Area Designs
NNB Expanse Bridge