Disc Makers ElitePro Kullanıcı Kılavuzu - Sayfa 9
Disk Çoğaltıcı Disc Makers ElitePro için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Disc Makers ElitePro 13 sayfaları. Elite series
Sayfayı Yazdır
ElitePRO_Getting_Started_03.indd 9
3
Click the Text tab to display the options for adding text to the image. Click New
to open an entry box for typing in the text. You can then use the text formatting
options to change colors, fonts, placement, and orientation of the text.
4
Click the Print tab to display the printer settings and label options. These
selections let you determine precisely the region on the disc where printing
takes place. For Disc Makers media, the Outer diameter of the print region, as
controlled by the upper slider, should be set to 117 mm, as shown in the figure.
5
Confirm that the selected template, shown just below the tabs, is set to Disc
Makers Autograph VII. If not, use the Select Template button to change the
template.
6
Click the Print button. The Windows Print dialog box appears. You can fine tune
the quality settings and other options by clicking the Preferences button, but for
this exercise, default settings are fine.
7
Confirm that the Disc Printer is selected. Select the Print to file option in the
dialog box to direct the print output to an image file that FlexWare can use.
8
Click Print. The Print to File dialog box appears.
9
Type the filename and destination—c:\output.prn—into the Output File Name
entry box. Click OK to confirm the entry and start the printing process. An im-
age file will be created with the name output.prn. If an existing output.prn file is
stored in the default location, Windows will ask if you want to overwrite it.
ElitePRO Getting Started Guide
2/20/06 4:40:08 PM
9