Disc Makers Reflex1 Kullanıcı Kılavuzu - Sayfa 8

Bilgisayar Donanımı Disc Makers Reflex1 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Disc Makers Reflex1 9 sayfaları. Dvd
Ayrıca Disc Makers Reflex1 için: Hızlı Başlangıç Kılavuzu (2 sayfalar), Kullanıcı Kılavuzu (6 sayfalar), Manuel (12 sayfalar)

Sayfayı Yazdır

5. After selecting a track to copy press the up arrow until "End" appears. In this

example one track is selected and the time for this track is 2:41. If four

tracks were selected the screen would show "4 Trk" and give the total time

for all four tracks.

Select Track:

End

6. Press the ENT button and the Reflex 1 will ask if all the selections are made

for this CD. Use the up or down arrow to change between Yes and No.

Pressing ENT with No on the LCD will take the user back to Select Track.

Pressing ENT with Yes on the screen will start the copying of the track (or

tracks) to the target CD.

End edit disc

and burn?

7. When the copying ends the unit will display "Burn Complete! OK: 01". Press

the ENT button. The LCD will display "Continue edit next Disc? NO". To change

to another CD, Load the top drive (reader) with another master disc, press

the up arrow to change the "No" to "Yes"and press ENT. This will take you to

the screen from step 3. Repeat steps 3 through 6 to put more tracks on the

CD.

1-800-237-6666

1 Trk 02:41

YES

www.discmakers.com

8. When there are no more tracks to write to the CD leave the "Continue edit

next Disc? NO" set to "No" and press the ENT key again. The following screen

will appear:

Close all discs

session?

Press ENT and the Reflex 1 will close the CD.

Note: the Edit Track CD to CD Edit is the only function enabled for the Reflex 1 in

the Edit Track section.

11. S

ETUP

This function allows the user to specify specific parameters for copying discs.

There are 16 sub items. From the main menu screen pressing "ENT" will show

the sub heading, pressing the up and down arrows allows the user to move

between the settings.

1. Language: allows the user to set English or Spanish as the display language.

2. CD Burn Speed: allows the user to change the speed at which the unit burns

CD-R recordable media. By pressing the "ENT" button the current setting will

be displayed, the user can then press the up and down arrows to change to

the desired speed. Pressing the "ENT" button will set the speed. Press "ESC"

to go back to the main menu.

3. DVD Burn Speed: allows the user to change the speed at which the unit

burns DVD-R and DVD+R recordable media. By pressing the "ENT" button the

current setting will be displayed, the user can then press the up and down

arrows to change to the desired speed. Pressing the "ENT" button will set the

speed. Press "ESC" to go back to the main menu.

4. Read Speed: The read speed can be changed after the master disc is placed

in the reader drive. With a disc in the reader drive and "11.04 Read Speed"

showing in the LED window, press "ENT" then the up or down arrows to scroll

YES