Disc Makers ReflexPro7 Kullanım Kılavuzu - Sayfa 11

Bilgisayar Donanımı Disc Makers ReflexPro7 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Disc Makers ReflexPro7 13 sayfaları. Cd-r disc duplicator reflexpro series
Ayrıca Disc Makers ReflexPro7 için: Hızlı Başlangıç Kılavuzu (2 sayfalar), Kullanıcı Kılavuzu (15 sayfalar)

Sayfayı Yazdır

1. Installation and Setup

Press once again START at END TRACK to exit. The ReflexPro will start loading those

music tracks selected into the current partition of the hard drive. After loading, the master

CD will be ejected automatically and the LCD will display PASS. You may change the

master CD and run the EDIT function again to gather more music tracks from different

master CDs. When finishing the collection, switch the function to COPY and place blank

CD-R media into the CD writers for duplication. If all of the CD discs are duplicated prop-

erly, they will be ejected from the CD writers automatically.

Please see the following examples and follow the instructions step by step. You

will find it is very easy to create compilation audio CDs with the ReflexPro:

Example 1:

To make a new collection of two CDs listed below:

#1 CD: 2, 4, 6-8 songs.

#2 CD: 3-6, 9, 13-16 songs.

Switch to the CLEAR MASTER function and press the START button to clear the data in

the existing partition of hard drive. Switch to the EDIT function. Place the first CD (#1)

disc into CD drive under the EDIT function and wait for the ReflexPro to analyze it. Press

the STATUS button to number 2 at BEGIN TRACK and press the START button to quit.

When END TRACK is displayed on the LCD, press the START button to quit directly

since the first song number is 2.

Press the STATUS button to number 4 at BEGIN TRACK and QUIT.

Press the START button again to quit.

Press STATUS to number 6 at BEGIN TRACK and QUIT.

Press STATUS to number 8 at END TRACK and QUIT.

Press STATUS to finish the selection of CD #1.

The ReflexPro will start to collect the tracks that you selected and move them into the

current partition of the hard drive. After successful loading is finished, the ReflexPro will

eject your master CD and show PASS on the LCD.

Place the master CD #2 disc into the CD Reader (top drive) and continue the selection of

the second CD. Repeat the procedures above.

Once the accumulated length of tracks selected has exceeded the maximum 80

minute capacity, the ReflexPro will stop accepting additional tracks. Switch to the

DELETE function to delete the last track stored in current partition in the hard drive if

necessary. Switch to COPY to start copying your own collection of music CD.

www.discmakers.com

1-888-800-4041