Aercus WH41 Kullanım Kılavuzu - Sayfa 5

Hava İstasyonu Aercus WH41 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Aercus WH41 12 sayfaları. Pm2.5 air quality sensor

4. Setup Guide

1. Remove the battery door on the base of the air

quality sensor.

2. Insert two rechargeable AA batteries.

3. After inserting the batteries, the remote sensor

(red) LED indicator will illuminate for 4 seconds,

and then flash once every 10 minutes thereafter.

Each time it flashes, the sensor is transmitting data.

4. Close the battery compartment cover.

5. Connect the USB cable to a standard USB power

adapter (not supplied) and charge battery until the

blue LED is turned off, indicating batteries are fully

charged.

6. Without the help of sufficient solar radiation, a

fully charged pair of batteries can last for about 20

days/500 hours. The battery status monitor on

display will reflect the battery power status. When

battery is exhausted, please charge the sensor

again.

The PM2.5 sensor does not have its own screen and must

be used with a compatible device such as a Weather Master

console or other compatible device.

If you have never connected a WH41 to your

WeatherMaster HP2550, it should automatically be seen by

Aercus Instruments™ - WH41

5 |

P a g e