Blade 350 QX2 Kullanım Kılavuzu - Sayfa 10
Quadcopterler Blade 350 QX2 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Blade 350 QX2 18 sayfaları.
Sayfayı Yazdır
Flying LED Codes
Smart Mode, with GPS lock
Smart Mode, no GPS lock
Stability Mode, with pressure
AP Mode, with GPS lock
AP Mode, no GPS lock
AP Mode, GPS disabled
Stability Mode, with GPS lock
Stability Mode, no GPS lock
Stability Mode, GPS disabled
Flight mode set to Smart Mode
Flight mode set to AP Mode
Flight mode set to Stability Mode
Flight battery voltage below 10.9V
Flight battery voltage below 10.6V
Compass calibration needed*
CAUTION: If you see the LED signal for low battery, immediately land your aircraft and recharge the battery.
CAUTION: Do not attempt to use Return Home with a low battery.
Calibration LED Codes
Gyro temperature calibration*
No calibration
Compass calibration entered
Compass calibration started
Pressure sensor temperature calibration
Pressure and gyro calibration*
Accelerometer offset calibration entered
(in fl ight only)
Accelerometer offset calibration started
(in fl ight only)
Calibration failed
EN
Sequence
1 second
1 second
*The LED may randomly fl ash orange. Unless it is repeated in the pattern
above, compass calibration is not needed.
Sequence
1 second
1 second
* These items are performed by the manufacturer.
Solid green
3 green fl ashes, pause
Slow green fl ash
Solid purple
3 purple fl ashes, pause
Slow purple fl ash
Solid blue
3 blue fl ashes, pause
Slow blue fl ash
Red, green and blue fl ash (~3 second cycle)
Red, green and blue fl ash (~1 second cycle)
Slow orange fl ash
1 second
Rapid green and blue fl ashing
Green pulsing
Slow red and green fl ashing
Rapid red and green fl ashing
Rapid red and blue fl ashing
Rapid red, green and blue fl ashing
Slow red, green and blue fl ashing
Rapid red, green and blue fl ashing
Solid white
1 second
10
Shows fl ight mode position on motor startup