DISCO DAC351 Veri Bakım Kılavuzu - Sayfa 10
Testere DISCO DAC351 için çevrimiçi göz atın veya pdf Veri Bakım Kılavuzu indirin. DISCO DAC351 20 sayfaları. Automatic dicing/cutting saws
Sayfayı Yazdır
- 1. Read Carefully before Using this Manual
- 2. Introduction
- 2. Table of Contents
- 3. Contents
- 4. C. General Description of Data Screen
- 5. Important Safety Information
- 5. General Safety Precautions
- 5. Safety Precautions to be Observed During Operation
- 5. Inherently Hazardous Areas and Ways to Avoid Hazards
- 5. EMO Switch
- 5. Operations
Axis Arrangement Diagram [321/351/361]
The diagram and the table below show axis arrangement, names and functions
of each axis.
X-axis
Y-axis
Z-axis
θ -axis
Spindle Shaft
Section
Main Body Frame
Spindle axis
θ
-axis
(except 351)
X-axis
Front
Name
Moves the chuck table to the right and the left.
Moves the spindle shaft and the microscope forward
and backward.
Moves the spindle up and down.
Rotates the chuck table.
Rotates a blade at a high speed.
Supports the machine main body.
Function
Intro-6
Z-axis
Y-axis
Main body frame