DISCO DAC351 Veri Bakım Kılavuzu - Sayfa 5
Testere DISCO DAC351 için çevrimiçi göz atın veya pdf Veri Bakım Kılavuzu indirin. DISCO DAC351 20 sayfaları. Automatic dicing/cutting saws
Sayfayı Yazdır
- 1. Read Carefully before Using this Manual
- 2. Introduction
- 2. Table of Contents
- 3. Contents
- 4. C. General Description of Data Screen
- 5. Important Safety Information
- 5. General Safety Precautions
- 5. Safety Precautions to be Observed During Operation
- 5. Inherently Hazardous Areas and Ways to Avoid Hazards
- 5. EMO Switch
- 5. Operations
INTRODUCTION
About this manual
This Data Maintenance Manual describes the screen details related to certain
operations and procedures for setting operational data and machine operation
data concerning Automatic Dicing/Cutting Saws 3*1 Series Models DAD321,
DAC351, DAD361, DAD341 and DAD381 for data maintenance personnel.
To ensure safety
To ensure safety, be sure to thoroughly read and understand the contents of this
manual before starting any operation of the machine. Note that this manual is
based on the software version of 5.4 series.
When performing data setup or operation related to data, be sure to follow the
procedures set forth in this manual.
Definition of a manager and an operator
This manual defines a manager and an operator as follows:
Category
Applicable
Personnel
Manager
Management
representative
Maintenance
personnel
Operator
Data maintenance
personnel
Operator
The person who is responsible for overall
management of machines and operators.
The qualified person who received DISCO
machine maintenance training.
The qualified person who is responsible
for management of software data of the
machine.
The person who operates the machine to
process workpieces.
Intro-1
Job